LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Mechanical - 4.4L (3 Of 5)) >> Off-Vehicle Repair Instructions (Part 2) >> Camshaft Position Actuator Housing Cleaning and Inspection - Off Vehicle >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Inspecting Camshaft Position Actuator Housing
    GM1040927Courtesy of GENERAL MOTORS CORP.
  1. Inspect the camshaft position actuator housing for the following conditions:
    • The camshaft position actuator housing for damaged threads (1)
    • The camshaft position actuator housing sealing surface (2) for damage
    • The camshaft position sensor mounting bores (3) for damage
    2. Fig 2: Inspecting Camshaft Position Actuator Magnets
    GM1254507Courtesy of GENERAL MOTORS CORP.
  2. Inspect the camshaft position actuator magnets for the following conditions:
    • The camshaft position actuator magnet wiring connector (1) for damage
    • The camshaft position actuator magnet sealing surface (2) for damage
  3. Repair or replace the camshaft position actuator housing and/or components as necessary.
scientia non olet · About LEMON Manuals