LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Mechanical - 4.6L (LH2) - 2 Of 5) >> On-Vehicle Repair Instructions (Part 2) >> Engine Flywheel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Engine Flywheel
    GM1346206Courtesy of GENERAL MOTORS CORP.
  1. Remove the transmission assembly. Refer to Transmission Replacement (w/RPO LH2) .
  2. Use a Snap-On™ A144A Flywheel Turner, or equivalent to prevent the engine from rotating.
  3. Remove the engine flywheel bolts.
  4. Clean and inspect the flywheel. Refer to Engine Flywheel Cleaning and Inspection
scientia non olet · About LEMON Manuals