LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Control System - 4.4L - DTC P0506 To P2544) >> DTC P0650 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Ignition ON, the MIL should turn ON and OFF when commanded with a scan tool.
  2. Ignition ON, observe the scan tool MIL Circuit Status parameter. The reading should indicate Incomplete and continue to indicate Incomplete when commanding the MIL ON and OFF.
  3. Engine running, observe the DTC information with a scan tool. DTC P0650 should not set.
  4. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
scientia non olet · About LEMON Manuals