Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0122, P0123, P0128, P0171, P0172, P0174, P0175, P0201-P0208, P0220, P0222, P0223, P0300, P0301-P0308, P0336, P0440, P0442, P0443, P0446, P0452, P0453, P0496, P0502, P0503, P0641, P0651, P1514, P1516, P2101, P2135, P2176 are not set.
The engine is operating for at least 60 seconds.
The engine coolant temperature (ECT) is more than -15°C (5°F).
The intake air temperature (IAT) is more than -18°C (0°F).
The barometric pressure (BARO) is more than 65 kPa.
The system voltage is between 10.5-18 volts.
The engine is at a stable idle for more than 2 seconds.
DTC P0506 and P0507 run continuously when the above conditions are met.