Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
- DTCs P0324, P0325 and P0330 run continuously when the engine speed is greater than or equal to 2,000 RPM and engine load is greater than a calibrated amount.
- DTCs P0326 run continuously when:
- The engine speed is greater than or equal to 800 RPM
- The MAP is greater than 42 kPa
- DTCs P0120, P0121, P0122, or P0123 are not set
- DTC P0325, P0330, P0327, P0328, P0332, P0333 run continuously when:
- The engine speed is greater than or equal to 1,500 RPM
- The engine coolant temperature (ECT) is greater than 75°C (167°F)
- The engine run time is greater than 90 seconds