Circuit Description

The exhaust camshaft position (CMP) sensor is a hall integrated circuit (IC) type sensor that works in conjunction with a single tooth reluctor wheel used to determine the position of the exhaust camshaft. The engine control module (ECM) supplies a 12-volt pull up voltage on the CMP sensor signal circuit. As the tooth on the reluctor wheel passes the CMP sensor, it sends a digital signal which is an image of the reluctor wheel to the ECM. The ECM processes this information to determine the exact position of the camshafts, and to determine the optimum ignition and injection points of the engine. The CMP sensor wiring consists of a 12-volt reference circuit, a low reference circuit, and a signal circuit. If the ECM cannot see a change in the exhaust CMP sensor signal, DTC P0365 or P0390 will set.