Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
- DTCs P0030, P0031, P0032, P0036, P0037, P0038, P0050, P0051, P0052, P0056, P0057, P0058, P0101, P0102, P0103, P0106, P0107, P0108, P0131, P0132, P0133, P0135, P0137, P0138, P0139, P0140, P0141, P0151, P0152, P0153, P0155, P0157, P0158, P0159, P0160, P0161, P1137, P1138, P1157, P1158, P2231, P2234, P2237, P2240, P2243, P2247, P2251, P2254, P2626, P2629, are not set.
- The engine is running.
- The ignition 1 signal parameter is more than 10 volts.
- The HO2S Heater Bn 1 Sen. 1 or HO2S Heater Bn 2 Sen. 1 is more than 14.8 percent.
- The battery voltage is more than 10 volts.
- DTC P0135 or P0155 runs continuously once the above conditions are met.