Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P0050, P0056, P0059, P0060, P0068, P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0120, 0122, P0123, P0128, P0151, P0152, P0153, P0154, P0155, P0157, P0158, P0160, P0201-P0208, P0220, P0222, P0223, P0300, P0301-P0308, P0442, P0443, P0446, P0449, P0451, P0452, P0453, P0454, P0455, P0496, P0506, P0507, P1153, P1516, P2101, P2119, P2120, P2125, P2135, P2138, P2A03, P2A04 are not set.
The engine is in CL status.
The Fuel Trim Learn is enabled.
The engine coolant temperature (ECT) is between -38 and +150°C (-36.4 and +302°F).
The intake air temperature (IAT) is between -38 and +150°C (-36.4 and +302°F).
The manifold absolute pressure (MAP) is between 5-255 kPa (0.7-36.9 psi).
The vehicle speed is less than 134 km/h (83 mph).
The engine speed is between 400-6,000 RPM.
The mass air flow (MAF) is between 0.5-510 g/s.
The barometric pressure (BARO) is more than 70 kPa (10.1 psi).
The fuel level is more than 10 percent.
DTC P0174 or P0175 runs continuously when the above conditions have been met.