Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Before the ECM can report DTC P0111 failed, DTC P0116 must run.

The ECM detects a temperature difference at power-up that indicates that the IAT sensor is 30°C (54°F) more than the IAT sensor 2.
OR
The ECM detects a temperature difference at power-up that indicates that the IAT sensor is 16°C (29°F) more than the IAT sensor 2, and the time spent cranking the engine is more than 30 seconds, when the fuel level is more than 2.5 percent.