LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Control System - 4.4L - DTC P0010 To P0175) >> DTC P0106 >> Repair Verification

Repair Verification

WARNING: This page is about a different variant/trim than selected.
  1. Ignition ON, observe the MAP, SC Inlet Pressure, and BARO parameters with a scan tool. The MAP, SC Inlet Pressure, and BARO sensor parameters should be within 5 kPa of each other.
  2. With a scan tool, command the supercharger bypass control valve ON. Slowly increase the engine speed from idle to 2,000 RPM and return the engine to idle speed.
    • The MAP sensor parameter should increment to a higher value and return to the normal idle value.
scientia non olet · About LEMON Manuals