Installation Procedure
WARNING: This page is about a different variant/trim than selected.
- Install the primary camshaft drive chain guide and retaining bolts.
Tighten: Tighten the primary camshaft drive chain guide bolts to 25 N.m (18 lb ft).
- Install the primary camshaft drive chain tensioner. Refer to Primary Camshaft Drive Chain Tensioner Replacement .
- Install the oil outlet tube (4) to the engine. Refer to Oil Pump Outlet Tube Installation .
- Install the left side secondary camshaft drive chain guide. Refer to Secondary Camshaft Drive Chain Guide Replacement - Left Side .
- Install the left side secondary camshaft drive chain shoe. Refer to Secondary Camshaft Drive Chain Shoe Replacement - Left Side .
- Install the right side secondary camshaft drive chain guide. Refer to Secondary Camshaft Drive Chain Guide Replacement - Right Side .
- Install the right side secondary camshaft drive chain shoe. Refer to Secondary Camshaft Drive Chain Shoe Replacement - Right Side .
- Install the left side secondary camshaft drive chain (2). Refer to Secondary Camshaft Drive Chain Replacement - Left Side .
- Install the right side secondary camshaft drive chain (4). Refer to Secondary Camshaft Drive Chain Replacement - Right Side .
NOTE:
Refer to Fastener Notice
.