LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 4.4L (1 Of 5)) >> On-Vehicle Repair Instructions (Part 1) >> Oil Level Indicator and Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Oil Level Indicator Tube
    GM928132Courtesy of GENERAL MOTORS CORP.
  1. Remove the front compartment sight shield as necessary. Refer to Front Compartment Sight Shields Replacement .
  2. Remove the oil level indicator.
  3. Loosen the oil level indicator tube bolt.
  4. Pull the oil level indicator tube from the crankcase.
scientia non olet · About LEMON Manuals