LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 4.4L (1 Of 5)) >> On-Vehicle Repair Instructions (Part 1) >> Engine Oil Pressure Sensor and/or Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Oil Filter Adapter
    GM1346212Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil filter adapter. Refer to Oil Filter Adapter Replacement .
  2. Remove the oil pressure sensor and/or switch from the oil filter adapter.
  3. Clean and inspect the oil filter adapter. Refer to Oil Filter Adapter Cleaning and Inspection .
scientia non olet · About LEMON Manuals