LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Insulator Panel Replacement - Right Side >> Installation Procedure

Installation Procedure

    Fig 1: View Of Right Closeout/Insulator Panel
    GM1386659Courtesy of GENERAL MOTORS CORP.
  1. Connect the courtesy lamp electrical connector (1).
  2. Locate the insulator panel onto the Instrument panel.
    3. NOTE: Refer to Fastener Notice .
  3. Install the screws securing the instrument panel.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

scientia non olet · About LEMON Manuals