Removal Procedure
- Remove the front seats. Refer to Bucket Seat Replacement .
- Remove the instrument panel retainer. Refer to Instrument Panel Retainer Replacement .
- Lower the steering column. Refer to Steering Column Replacement .
- Disconnect the wire harness connector and clips on the drivers side of the vehicle.
- Remove the wire harness clips in the center of the instrument panel.
- Disconnect the wire harness connectors and the harness clips on the passenger side of the instrument panel.
- Loosen the nuts securing the instrument panel carrier brackets to the pedal assembly.
The nuts do not have to be removed.
- Remove the fasteners securing the carrier to the cowl.
- Remove the bolt securing the carrier to the HVAC housing.
- Move the carrier back away from the cowl far enough to disconnect the wire harness retaining clips off of the carrier.
- Remove the carrier from the vehicle.
IMPORTANT:
Note the position of the wire harness.