LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Cluster Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Instrument Panel Cluster (IPC)
    GM1386626Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 4 screws (1) securing the instrument panel cluster.

    Tighten:  Tighten the screws (1) to 2 N.m (9 lb in).

  3. Install the instrument panel cluster trim. Refer to Instrument Cluster Trim Panel Replacement .
  4. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals