LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Ignition and Start Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the instrument cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement .
    2. Fig 1: View Of Ignition Switch
    GM1466128Courtesy of GENERAL MOTORS CORP.
  2. Release the tabs securing the switch (1) to the trim panel.
  3. Remove the switch.
scientia non olet · About LEMON Manuals