LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Driver Knee Bolster Reinforcement Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Bolster Trim Panel
    GM1386654Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  2. Pull the bolster trim panel out and downward in order to release the clips securing the panel to the instrument panel.
    3. Fig 2: View Of Knee Bolster Reinforcement
    GM1386652Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolts securing the bolster bracket to the instrument panel.
scientia non olet · About LEMON Manuals