Diagnostic Aids
- When the Info Up, Info Down, Info Reset, or English/Metric switch is stuck, only the Trip A/B switch functions correctly. When the Trip A/B switch is stuck, all other DIC switches function correctly.
- Only the DIC signal circuit can be diagnosed as shorted to battery.
- Refer to Testing for Intermittent Conditions and Poor Connections .
DTC B3567
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Instrument Cluster Schematics Connector End View Reference: Instrument Panel, Gages, and Console Connector End Views or Inline Harness Connector End Views |
|||
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle |
| 2 |
|
Go to Diagnostic Aids | Go to Step 3 |
| 3 |
|
Go to Step 4 | Go to Step 5 |
| 4 | Test the DIC switch signal circuit for a short to battery voltage. Refer to Circuit Testing
and Wiring Repairs
. Did you find and correct the condition? |
Go to Step 9 | Go to Step 6 |
| 5 | Inspect for poor connections at the harness connector of the DIC switch. Refer to Testing for Intermittent Conditions and Poor Connections
and Connector Repairs
. Did you find and correct the condition? |
Go to Step 9 | Go to Step 7 |
| 6 | Inspect for poor connections at the harness connector of the IPC. Refer to Testing for Intermittent Conditions and Poor Connections
and Connector Repairs
. Did you find and correct the condition? |
Go to Step 9 | Go to Step 8 |
| 7 | Replace the instrument panel (I/P) dimmer switch. Refer to Instrument Panel Dimmer Switch Replacement
. Did you complete the replacement? |
Go to Step 9 | - |
| 8 | Replace the IPC. Refer to Control Module References
for replacement, setup, and programming. Did you complete the replacement? |
Go to Step 9 | - |
| 9 |
|
Go to Step 2 | System OK |