LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> Escalade AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 793 (Transfer Case - BW 4482-Nr4 - Service) >> Repair Instructions >> Transfer Case Shift Control Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 GMC Yukon XL and 2006 GMC Yukon. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Air Deflector Louver, Retainers & Switches
    GM676695Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel (I/P) cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.
  2. Remove the air deflector louver.
  3. Disengage the retainers, and pull out the headlamp, shift control, and cargo lamp switches in order to disconnect the electrical connectors.
    4. Fig 2: Disconnecting Selector Switch Electrical Connectors
    GM830158Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the following electrical connectors:
    • Cargo lamp switch (1)
    • Shift control switch (2, 3)
    • Headlamp switch (4)
  5. Remove the headlamp, shift control, and cargo lamp switch housing.
    6. Fig 3: Removing Selector Switch From Housing
    GM396838Courtesy of GENERAL MOTORS CORP.
  6. Remove the shift control switch from the housing.
scientia non olet · About LEMON Manuals