LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> Escalade AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 793 (Transfer Case - BW 4482-Nr4 - Service) >> Repair Instructions >> Transfer Case Input Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 GMC Yukon XL and 2006 GMC Yukon. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Input Shaft Seal Using J 23907 & J 36825
    GM819621Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: It may be necessary to use a sharp punch in order to poke a hole into the seal prior to inserting J 36825  .
  1. Remove the transfer case. Refer to Transfer Case Assembly Replacement .
  2. Using J 23907  (1), and J 36825  (2), remove the input seal.
scientia non olet · About LEMON Manuals