Conditions for Running the DTC
WARNING: This page is about a different car, the 2006 GMC Yukon XL, 2006 Chevrolet Suburban, and 2006 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- No MAF sensor DTC P0101, P0102 or P0103.
- No MAP sensor DTC P0106, P0107 or P0108.
- No TP sensor DTC P0121, P0122 or P0123.
- No AT ISS DTC P0716 or P0717.
- No TFP manual valve position switch DTC P1810.
- The engine torque must be between 108 N.m (80 lb ft) and:
- 6.0L: 576 N.m (425 lb ft)
- 8.1L: 881 N.m (650 lb ft)
- No change in 4WD low switch for at least 2 seconds.
- The AT ISS is greater than 1,400 RPM.
- The gear range is not PARK or NEUTRAL.
- The system voltage is between 8-18 volts for greater than 0.5 second.
- Throttle angle is equal to or greater than 10 percent.
- No VSS DTC P0503.
- The engine is running greater than 400 RPM for more than 7 seconds.