Transfer Case Popping Noise

WARNING: This page is about a different car, the 2006 GMC Yukon XL, 2006 GMC Yukon, 2006 Chevrolet Tahoe, 2006 Chevrolet Suburban, and 2006 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Cause	Correction
DEFINITION: A faulty internal transfer case component that causes a popping noise in the transfer case. Review the Symptoms - Transfer Case and perform the necessary inspections.
Chain jump	Replace the chain and sprockets. Refer to Transfer Case Disassemble and Transfer Case Assemble in Transfer Case - NVG 246-NP8 Unit Repair. Replace the shaft bearings. Refer to Transfer Case Disassemble and Transfer Case Assemble in Transfer Case - NVG 246-NP8 Unit Repair. Inspect for damaged components caused by metal debris. Refer to Cleaning and Inspection in Transfer Case - NVG 246-NP8 Unit Repair.

Cause

Correction

DEFINITION: A faulty internal transfer case component that causes a popping noise in the transfer case.
Review the Symptoms - Transfer Case and perform the necessary inspections.

Chain jump

Replace the chain and sprockets. Refer to Transfer Case Disassemble and Transfer Case Assemble in Transfer Case - NVG 246-NP8 Unit Repair.
Replace the shaft bearings. Refer to Transfer Case Disassemble and Transfer Case Assemble in Transfer Case - NVG 246-NP8 Unit Repair.
Inspect for damaged components caused by metal debris. Refer to Cleaning and Inspection in Transfer Case - NVG 246-NP8 Unit Repair.