LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> Escalade AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 786 (Engine Mechanical - 8.1L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Oil Pump Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 GMC Yukon XL, 2006 Chevrolet Suburban, and 2006 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Pump
    GM843907Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil pan. Refer to Oil Pan Replacement .
  2. Remove the oil pump bolt.
  3. Remove and separate the oil pump, retainer, and driveshaft.
  4. Discard the driveshaft retainer.
  5. Fig 2: View Of Crankshaft Oil Deflector
    GM843909Courtesy of GENERAL MOTORS CORP.
  6. Remove the crankshaft oil deflector nuts.
  7. Remove the crankshaft oil deflector.
  8. Clean and inspect the oil pump. Refer to Oil Pump Cleaning and Inspection .