LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> Escalade AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 786 (Engine Mechanical - 8.1L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Oil Level Indicator and Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 GMC Yukon XL, 2006 Chevrolet Suburban, and 2006 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Level Indicator
    GM843859Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil level indicator from the indicator tube.
    2. Fig 2: View Of ECT Sensor Electrical Connector
    GM843867Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the engine coolant temperature (ECT) sensor electrical connector.
  3. Remove the ECT sensor connector from the indicator tube.
    4. Fig 3: View Of Indicator Tube Bracket
    GM843863Courtesy of GENERAL MOTORS CORP.
  4. Remove the indicator tube bolt.
  5. Remove the indicator tube bracket.
  6. Remove the O-ring seal from the indicator tube.
scientia non olet · About LEMON Manuals