LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> Escalade AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 786 (Engine Mechanical - 8.1L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Water Crossover Removal

Water Crossover Removal

WARNING: This page is about a different car, the 2006 GMC Yukon XL, 2006 Chevrolet Suburban, and 2006 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Drive Belt Tensioner
    GM470789Courtesy of GENERAL MOTORS CORP.
  1. Remove the drive belt tensioner bolts.
  2. Remove the drive belt tensioner.
    3. Fig 2: Thermostat Bypass Hose & Clamps
    GM470692Courtesy of GENERAL MOTORS CORP.
  3. Remove the thermostat bypass hose and clamps.
    4. Fig 3: View Of Engine Coolant Crossover & Gasket
    GM470698Courtesy of GENERAL MOTORS CORP.
  4. Remove the engine coolant crossover bolts.
  5. Remove the engine coolant crossover.
  6. Remove the crossover gaskets.
    7. Fig 4: View Of Water Outlet, Bolts, Thermostat & Coolant Crossover
    GM1309968Courtesy of GENERAL MOTORS CORP.
  7. Remove the water outlet bolts/studs (310).
  8. Remove the water outlet (311).
  9. Remove the thermostat (312) from the coolant crossover (308).
scientia non olet · About LEMON Manuals