Oil Pump, Screen and Crankshaft Oil Deflector Removal
WARNING: This page is about a different car, the 2006 GMC Yukon XL, 2006 Chevrolet Suburban, and 2006 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the bolt that attaches the oil pump to the crankshaft rear bearing cap.
- Remove the oil pump, driveshaft and retainer from the crankshaft rear bearing cap.
- Separate the oil pump (422), driveshaft (420) and retainer (424).
- Discard the driveshaft retainer (424).
- Remove the crankshaft oil deflector nuts.
- Remove the crankshaft oil deflector.