Exhaust Manifold Removal - Right

WARNING: This page is about a different car, the 2006 GMC Yukon XL, 2006 Chevrolet Suburban, and 2006 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Spark Plug Wires (Right)

Courtesy of GENERAL MOTORS CORP.

NOTE: Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.

Remove the spark plug wires from the spark plugs and ignition coils.

Fig 2: View Of Exhaust Manifold Heat Shield (Right)

Courtesy of GENERAL MOTORS CORP.

Remove the exhaust manifold heat shield bolts and nuts.
Remove the exhaust manifold heat shield.

Fig 3: View Of Exhaust Manifold, Gasket & Nuts (Right)

Courtesy of GENERAL MOTORS CORP.

Remove the exhaust manifold nuts and center bolt.
Remove the exhaust manifold.
Remove the exhaust manifold gasket.

Fig 4: View Of Spark Plugs (Right)

Courtesy of GENERAL MOTORS CORP.

Remove the spark plugs, if required.

Fig 5: View Of Exhaust Manifold Studs (Right)

Courtesy of GENERAL MOTORS CORP.

Remove the exhaust manifold studs, if required.