LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> Escalade AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 784 (Automatic Transmission - 4L80-E/4L85-E - Introduction (2 Of 2)) >> Repair Instructions >> Vent Hose >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 GMC Yukon XL, 2006 Chevrolet Suburban, and 2006 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing The Vent Hose
    GM765125Courtesy of GENERAL MOTORS CORP.
  1. Install the vent hose to the transmission.
  2. Install the vent hose to the clip.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the bolt and the clamp.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).