Removal Procedure
WARNING: This page is about a different car, the 2006 GMC Yukon XL, 2006 Chevrolet Suburban, and 2006 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the transmission filter. Refer to Automatic Transmission Fluid/Filter Replacement .
- Remove the forward servo cover bolts, cover, and gasket.
- Remove the following parts:
- Forward servo piston pin (5)
- O-ring seal (4)
- Servo piston (3)
- Retainer (2)
- Piston spring (1)