Installation Procedure
WARNING: This page is about a different car, the 2006 GMC Yukon XL, 2006 Chevrolet Suburban, and 2006 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the following parts:
- Piston spring (1)
- Retainer (2)
- Servo piston (3)
- O-ring seal (4)
- Forward servo piston pin (5)NOTE: Refer to Fastener Notice in Cautions and Notices.
- Install the forward servo gasket, cover, and bolts.
Tighten: Tighten the bolts to 24 N.m (18 lb ft).
- Install the transmission filter. Refer to Automatic Transmission Fluid/Filter Replacement .