LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> Escalade AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 784 (Automatic Transmission - 4L80-E/4L85-E - Introduction (2 Of 2)) >> Repair Instructions >> Accumulator Housing Replacement >> Third and Fourth Clutch Accumulator Assembly

Third and Fourth Clutch Accumulator Assembly

WARNING: This page is about a different car, the 2006 GMC Yukon XL, 2006 Chevrolet Suburban, and 2006 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing 3rd Clutch Accumulator Piston
    GM477676Courtesy of GENERAL MOTORS CORP.
  1. Install the 3rd clutch accumulator piston inner (3) and outer (1) seals. Lubricate the 3rd clutch accumulator piston seals (1, 3) with DEXRON® III automatic transmission fluid.
  2. Install the 3rd clutch accumulator piston (2).
    3. Fig 2: Removing 4Th Clutch Accumulator Piston Pin Retainer Ring
    GM477680Courtesy of GENERAL MOTORS CORP.
  3. Install the 4th clutch accumulator piston seal (3). Lubricate the 4th clutch accumulator piston seal (3) with DEXRON® III automatic transmission fluid.
  4. Assemble the 4th clutch accumulator piston pin (2) with the 4th clutch accumulator piston (4).
  5. Install the 4th clutch accumulator piston assembly into the accumulator housing (1).
  6. Install the 4th clutch accumulator piston pin retainer ring (5) onto the 4th clutch accumulator piston pin (2).
scientia non olet · About LEMON Manuals