LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> Escalade AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 783 (Engine Control System - 8.1L - Introduction (2 Of 2)) >> Repair Instructions >> Knock Sensor (KS) 1 Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 GMC Yukon XL, 2006 Chevrolet Suburban, and 2006 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Knock Sensor (KS) 1 Electrical Connector
    GM1236369Courtesy of GENERAL MOTORS CORP.
  1. Drain the cooling system/engine block. Refer to Draining and Filling Cooling System in Engine Cooling.
  2. Disconnect the knock sensor electrical connector (4).
    3. Fig 2: Knock Sensor (KS) 1
    GM858224Courtesy of GENERAL MOTORS CORP.
  3. Remove the knock sensor.
scientia non olet · About LEMON Manuals