LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> Escalade AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 783 (Engine Control System - 8.1L - Introduction (2 Of 2)) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 GMC Yukon XL, 2006 Chevrolet Suburban, and 2006 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fuel Pressure Sensor
    GM1312086Courtesy of GENERAL MOTORS CORP.
  1. Remove the intermediate fuel/evaporative emission (EVAP) lines. Refer to Fuel Hose/Pipes Assembly Replacement (Front)  or Fuel Hose/Pipes Assembly Replacement (Intermediate) .
  2. Gently pry straight up, in order to remove the fuel pressure sensor (1).
scientia non olet · About LEMON Manuals