Removal Procedure

WARNING: This page is about a different car, the 2006 GMC Yukon XL, 2006 Chevrolet Suburban, and 2006 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Fuel Level Sensor (Front Tank)

Courtesy of GENERAL MOTORS CORP.

Remove the sending unit. Refer to Fuel Sender Assembly Replacement (Front Tank) or Fuel Sender Assembly Replacement (Rear Tank) .
Disconnect the level sensor electrical connector.
Release the level sensor retaining clip.
Squeeze the locking tangs together, and remove the fuel level sensor (1).