Removal Procedure

WARNING: This page is about a different car, the 2006 GMC Yukon XL, 2006 Chevrolet Suburban, and 2006 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of MAF/IAT Sensor Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Remove the intake air resonator. Refer to Intake Air Resonator Replacement .
Disconnect the mass air flow/intake air temperature (MAF/IAT) sensor electrical connector (3).

Fig 2: View Of Air Cleaner & Adapter

Courtesy of GENERAL MOTORS CORP.

Pull up on the air cleaner assembly (1) in order to release the retainers from the air cleaner adapter (2).

Fig 3: View Of Air Cleaner Assembly, MAF/IAT Sensor & Clamp

Courtesy of GENERAL MOTORS CORP.

If necessary, loosen the MAF/IAT sensor clamp.
Remove the MAF/IAT sensor.