LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> Escalade AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Bezel Replacement - Instrument Panel (I/P) Cluster >> Installation Procedure

Installation Procedure

    Fig 1: Removing I/P Bezel
    GM348730Courtesy of GENERAL MOTORS CORP.
  1. Position the bezel to the IP assembly.
  2. Attach the bezel to the IP assembly by pushing gently on the bezel till it is in place.
  3. Ensure all clips are in place.
  4. Tilt the steering wheel to the normal drive position.
  5. If equipped with an automatic transmission, move the shift lever to the park position.
  6. Disengage the parking brake.
scientia non olet · About LEMON Manuals