Camshaft Position (CMP) Sensor - Bank 1 Intake (LC3 or LH2)

WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Camshaft Position (CMP) Sensor - Bank 1 Intake (LC3 or LH2) Connector End View

Courtesy of GENERAL MOTORS CORP.

Pin	Wire	Circuit	Function
A	0.5 D-BU	6259	5-Volt Reference
B	0.5 BN	6266	Low Reference
C	0.35 D-BU/WH	6265	Camshaft Position (CMP) Sensor - Intake Bank 1 Signal

Connector Part Information

OEM: 15326808
Service: 15306388
Description: 3-Way F 150 GT Sealed (BK)

Terminal Part Information

Terminal/Tray: 12191819/8
Core/Insulation Crimp: E/A
Release Tool/Test Probe: 15315247/J-35616-2A (GY)