Oil Pump Suction Pipe and Screen Assembly Installation
WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Install NEW oil pump pipe gasket on oil pump pipe.
- Install the oil pump pick-up retaining bolt and nut.
- Tighten the oil pump pick-up tube nut to 24 N.m (18 lb ft) .
- Tighten the oil pump pick-up tube bolt to 10 N.m (89 lb in) .
CAUTION:
Refer to Fastener Caution
.