Air Conditioning (A/C) Compressor Installation
WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Place the air conditioner bracket in position to the engine.
- Loosely install the front air conditioner bracket bolts.
- Loosely install the side air conditioner bracket bolts.
- Tighten the air conditioner bracket bolts in proper sequence.
- Tighten the air conditioner bracket front upper bolt to 50 N.m (37 lb ft) .
- Tighten the air conditioner bracket front lower bolt to 50 N.m (37 lb ft) .
- Tighten the air conditioner bracket side upper bolt to 50 N.m (37 lb ft) .
- Tighten the air conditioner bracket side lower bolt to 50 N.m (37 lb ft) .
- Place the air conditioner compressor in position to the front air conditioner bracket.
- Loosely install the air conditioner compressor bolts. Ensure the longer bolt is installed in the front lower position.
- Tighten the air conditioner compressor bolts and tighten to 25 N.m (18 lb ft).
CAUTION:
Refer to Fastener Caution
.