Control Valve Upper Body Assembly Cleaning and Inspection
WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
|
CAUTION:
Valve springs can be tightly compressed. Use care when removing retainers and plugs. Personal injury could result.
NOTE:
Do not remove the clutch piston exhaust blow off ball plug, valve, or spring. The plug is set to a precise depth. Replacement of this plug could cause internal transmission damage. Preliminary Procedure: Clean and inspect all valve components, locating pins, and the valve body. The control valve upper body is replaceable only as an assembly. |
|
| 1 | Clutch Boost Valve Train |
| 2 | 1-2-3-4 Clutch Regulator Valve Train |
| 3 | 3-5 Reverse Clutch Regulator Valve Train |
| 4 | Clutch Boost Valve Train |
| 5 | 2-6 Clutch Regulator Valve Train |
| 6 | Clutch Boost Valve Train |
| 7 | 1st/Reverse Band and 4-5-6 Clutch Regulator Valve Train |
| 8 | Actuator Feed Limit Valve Train |
| 9 | Control Valve Body Locator Pin |
| 10 | Control Valve Body Locator Pin |
| 11 | Control Valve Body Locator Pin |