Wiring Harness Removal

Fig 1: View Of Wiring Harness To Valve Body Components

GM801799

Courtesy of GENERAL MOTORS CORP.

Using a small screwdriver pry the wiring harness (55) off of the following components:
- Pressure Control Solenoid (357)
- TCC PWM Solenoid (352)
- 1-2 Shift Solenoid (368)
- 2-3 Shift Solenoid (369)
- 4-5 Shift Solenoid (376)
- Manual Shift Shaft Switch (602)
- Input Speed Sensor (44)
- Output Speed Sensor (42)

Fig 2: Identifying Wiring Harness Connector Retainer

GM801801

Courtesy of GENERAL MOTORS CORP.

Remove the connector retainer (54) from the case (24).

Fig 3: Removing Wiring Harness

GM801802

Courtesy of GENERAL MOTORS CORP.

Remove the wiring harness (55) from the case (24).