LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 5L40-E/5L50-E - (Overhaul) >> Repair Instructions >> Wiring Harness Installation

Wiring Harness Installation

    Fig 1: Identifying Wiring Harness Connector Retainer
    GM801801Courtesy of GENERAL MOTORS CORP.
  1. Install the wiring harness connector (55) thru the case (24). Hold the connector and install the wiring harness connector retainer (54).
    2. Fig 2: View Of Wiring Harness To Valve Body Components
    GM801799Courtesy of GENERAL MOTORS CORP.
  2. Route the harness to the valve body and connect the following components:
    • Pressure Control Solenoid (357)
    • TCC PWM Solenoid (352)
    • 1-2 Shift Solenoid (368)
    • 2-3 Shift Solenoid (369)
    • 4-5 Shift Solenoid (376)
    • Internal Mode Switch - IMS (602)
    • Input Speed Sensor (44)
    • Output Speed Sensor (42)
scientia non olet · About LEMON Manuals