LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 5L40-E/5L50-E - (Overhaul) >> Repair Instructions >> Prop Flange Assemble

Prop Flange Assemble

    Fig 1: View Of Prop Shaft Flange & Components
    GM801790Courtesy of GENERAL MOTORS CORP.
  1. Install the NEW output shaft assembly retainer (30).
  2. Install the NEW prop shaft flange o-ring seal (32) into the prop shaft flange (31).
  3. Install the prop shaft flange (31).
  4. Put the transmission in Park.
    5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the NEW prop shaft flange thrust washer (33) and NEW prop shaft flange nut (34) using GM P/N 89021297.

    Tighten:  Tighten the prop shaft flange nut (34) to 57 N.m (42 lb ft).

scientia non olet · About LEMON Manuals