Overdrive Clutch Housing Removal

Tools Required 

J 45126  Snap Ring Pliers. See Special Tools .

Fig 1: Removing Snap Ring Using J 45126
Courtesy of GENERAL MOTORS CORP.
CAUTION: Use care when removing or installing the snap ring. Be sure the J 45126 snap ring pliers are installed properly onto the snap ring or bodily injury may occur.
1. Use J 45126  to remove the snap ring (14). See Special Tools .
Fig 2: Identifying Overdrive Clutch Housing
Courtesy of GENERAL MOTORS CORP.
2. Remove the overdrive clutch housing (15) from the case (24).