LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 5L40-E/5L50-E - (Overhaul) >> Repair Instructions >> Output Shaft Speed Sensor Installation

Output Shaft Speed Sensor Installation

    Fig 1: Identifying Output Shaft Speed Sensor
    GM801807Courtesy of GENERAL MOTORS CORP.
  1. Install the output speed sensor (42) into the case.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the output speed sensor bolt (43) into the case.

    Tighten:  Tighten the output speed sensor bolt (43) to 11 N.m (8 lb ft).

scientia non olet · About LEMON Manuals