LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 5L40-E/5L50-E - (Overhaul) >> Repair Instructions >> Input Speed Sensor Installation

Input Speed Sensor Installation

    Fig 1: Locating Input Speed Sensor
    GM801806Courtesy of GENERAL MOTORS CORP.
  1. Rotate the transmission 90 degrees.
  2. Install the input speed sensor (44) into the case (24).
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the input speed sensor bolt (45) into the case (24).

    Tighten:  Tighten the input speed sensor bolt (45) to 11 N.m (8 lb ft).

scientia non olet · About LEMON Manuals