LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 5L40-E/5L50-E - (Overhaul) >> Repair Instructions >> Fluid Pump Removal

Fluid Pump Removal

    Fig 1: Locating Oil Pump To Torque Converter Housing Bolts
    GM801901Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil pump to torque converter housing bolts (240, 241).
    2. Fig 2: View Of Pump Cover Housing
    GM801902Courtesy of GENERAL MOTORS CORP.
  2. Remove the oil pump cover (202).
    3. Fig 3: Locating Fluid Pump Vane & Rotor Components
    GM801903Courtesy of GENERAL MOTORS CORP.
  3. Remove the pump vane ring (221).
  4. Remove the pump vanes (222).
  5. Remove the pump rotor (223).
  6. Remove the pump rotor guide (224).
  7. Remove the pump vane ring (225).
    8. Fig 4: Identifying Fluid Pump Components
    GM801904Courtesy of GENERAL MOTORS CORP.
  8. Remove the pump slide spring (219).
  9. Remove the pump slide (216).
  10. Remove the fluid pump slide pin (231).
  11. Remove the pump slide ring (220, 242).
  12. Remove the fluid pump support (217) and the fluid pump slide seal (218).
scientia non olet · About LEMON Manuals