Fastener Tightening Specifications (5L40-E)
WARNING: This page is about a different variant/trim than selected.
Fastener Tightening Specifications (On Vehicle)
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Case Extension Housing Bolt | 22 N.m | 16 lb ft |
| Control Valve Body Assembly Bolt | 11 N.m | 97 lb in |
| Detent Spring Bolt | 11 N.m | 97 lb in |
| Drive Flange Nut | 57 N.m | 42 lb ft |
| Fluid Drain Plug | 20 N.m | 15 lb ft |
| Fluid Fill Plug | 20 N.m | 15 lb ft |
| Fluid Pan Bolt | 11 N.m | 97 lb in |
| Input Speed Sensor Bolt | 11 N.m | 97 lb in |
| Manual Shift Shaft Nut | 9 N.m | 80 lb in |
| Oil Pressure Test Plug | 11 N.m | 97 lb in |
| Output Speed Sensor Bolt | 11 N.m | 97 lb in |
| Shift Control Assembly to Tunnel Reinforcement Nut | 12 N.m | 106 lb in |
| Shift Control Linkage Adjustment Nut | 9 N.m | 80 lb in |
| Torque Converter Bolt | 63 N.m | 46 lb ft |
| Torque Converter Seal Bolt | 3.6 N.m | 31.9 lb in |
| Transmission Mount Bracket to Body Bolt | 60 N.m | 44 lb ft |
| Transmission Mount Bracket to Transmission | 60 N.m | 44 lb ft |
| Transmission Mounting Bolt M10x1.5 | 50 N.m | 37 lb ft |
| Transmission Mounting Bolt M12x1.75 | 75 N.m | 55 lb ft |
| Transmission Oil Cooler Line to Cooling Fan Shroud Bolts | 6.5 N.m | 58 lb in |
| Transmission Oil Cooler Line to Transmission Oil Cooler Fittings | 20 N.m | 15 lb ft |
| Transmission Oil Cooler Line to Transmission Retainer Bolt | 25 N.m | 18 lb ft |
| Transmission Oil Cooler Mounting Bolts | 5 N.m | 44 lb in |
| Transmission Oil Cooler Retainer Bracket Bolt | 25 N.m | 18 lb ft |