LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transmission - 5L40-E/5L50-E - Introduction & Repair Instructions) >> Repair Instructions >> Torque Converter Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission from the vehicle. Refer to Transmission Replacement (w/RPO LY7)  or Transmission Replacement (w/RPO LH2) .
  2. Fig 1: View Of Torque Converter
    GM792797Courtesy of GENERAL MOTORS CORP.
  3. Remove the torque converter from the transmission.
  4. Fig 2: Removing Input Shaft Seal
    GM812783Courtesy of GENERAL MOTORS CORP.
  5. Remove the input shaft seal. Refer to Seal Replacement - Torque Converter .